NEC N8406-022 manual Number of ports, CPU Blade”

(English)

Number of ports

The following table lists the ports.

Category	Port number	Speed	Description
Internal interface
CPU Blade	1-16	1000Mbps	The ports dedicated to the CPU Blade. Each port
			connects with each CPU Blade installed the
			Blade Slot in the Blade Enclosure. The
			connection is difference between the Blade
			Enclosures. Refer to page 28 “Connection with
			CPU Blade”.
Switch Module	17-18	1000Mbps	The ports dedicated to communications between
			two Switch Modules that are inserted in adjacent
			Switch Module slots. By default, trunk group 1 is
			configured on ports 17 and 18, and ports 17 and
			18 are disabled.
Management network	19	10/100Mbps	The port dedicated to management network. Port
			19 is isolated from the other ports by using
			VLAN. Use port 19 for managing the Switch
			Module. To connect the management interface,
			connect the port in the Blade Enclosure. For
			more information, see the Blade Enclosure
			User’s Guide.
External interface
Uplink	20-24	10/100/	RJ-45 uplink ports
		1000Mbps
Serial port	-	9600bps	DB-9 management serial port

NOTE: By default, VLAN 1 is the default VLAN, and all ports except Port 19 are assigned to it.

26