NEC N8406-022 manual Connection with CPU Blade

(English)

Connection with CPU Blade

The following figure shows the network connection diagram between CPU Blades and Switch Modules. Port 3 and 4 of Mezzanine slot 2 are available only when Type II Mezzanine Card installed.

		Port4
	Mezzanine	Port3
	slot 2	Port2
	(Type-1,2)
CPU Blade		Port1
(Express5800/120Bb-6)	Mezzanine	Port2
	slot1
	(Type-1)	Port1
	on-board LAN	Port2
		Port1

To Switch Module slot 6 in Blade Enclosure(6U) To Switch Module slot 8 in Blade Enclosure(10U) To Switch Module slot 5 in Blade Enclosure(6U) To Switch Module slot 7 in Blade Enclosure(10U)

To Switch Module slot 6 To Switch Module slot 5

To Switch Module slot 4

To Switch Module slot 3

To Switch Module slot 2

To Switch Module slot 1

Switch Module slot number in Blade Enclosure

Switch Module slot 5	Switch Module slot 6
Switch Module slot 3	Switch Module slot 4
Switch Module slot 1	Switch Module slot 2

Switch Module slot 1 Switch Module slot 3 Switch Module slot 5 Switch Module slot 7

Switch Module slot 2 Switch Module slot 4 Switch Module slot 6 Switch Module slot 8

Blade Enclosure (6U)	Blade Enclosure (10U)
	Rear View

NOTE: Switch Module slots 7 and 8 of Blade Enclosure (10U) are available only when Type II Mezzanine Card is installed in CPU Blade.

28