Roamer Installation Guide | Application Configuration |
Step 3: OAI Facilities
According to instructions in the APM Operations Manual, designate the following
NEAX2400 facilities for Roamer using the Facilities command on the
Configuration Entry screen:
FLF | Free Location | MRFR | Mode Release (R) |
MRFI | Mode Release (I) | MSF | OAI Mode Set |
NTF | Number Transfer | TCFD | Terminal Control (D) |
TCFI | Terminal Control (I) |
|
|
Note: The same MSF identification number (i.e., from 128 to 192) that is selected in the APM during Step 3 must be assigned to Roamer at the NEAX MAT. For more in- formation, see Chapter 4, “MAT Assignments” on page 15.
Page 7 |
