Roamer Installation Guide | Application Configuration |
Chapter 2 Application Configuration
Roamer is configured into the APM system using the Add function of the
Application Configuration option on the APM System Administration menu:
1.Enter the APM option from the APM Platform Management Menu.
2.Enter the System Administrator password at the APM password screen.
3.Enter the Application Configuration option from the System Administration menu.
This section contains the information that should be entered to the configuration file for Roamer. For specific instructions on what these parameters mean and how to make these entries, use the APM Operations Manual.
Step 1: Application Characteristics
In adding Roamer to the APM Application Configuration file, define it as an OAI application that does not need a CRT or a communication queue, as shown below.
Note: Entries for parameters that are marked with an asterisk (*) should be made ex- actly as they are shown. All other entries in this guide serve only as examples.
Parameter | Entry | Description |
|
|
|
OAI Application (Y,N) | Y | Y(es). Roamer is an OAI |
|
| application because it |
|
| communicates with the |
|
| NEAX2400 using OAI |
|
| processes. |
|
|
|
CRT Application (Y,N) | N | (No). Roamer does not require a |
|
| terminal screen that is of the |
|
| same type as the one used by the |
|
| APM. |
|
|
|
Communication Queue (Y/N) | N | (No). Roamer does not need an |
|
| IPC queue to communicate with |
|
| other processes. |
|
|
|
Page 5 |
