MAT Assignments | Roamer Installation Guide |
Assignment of Numbering Plan to Support Free Location Feature
ANPD Command: (Assignment of Numbering Plan Data)
ASPA Command: (Assignment of Special Access Code)
ASDT Command: (Assignment of Station Data)
This command is used to assign the actual first digit and the total number of digits for the set of physical numbers and again for the logical numbers. For instance, if the physical numbers are to be four digits long and lie in the range between 3000 to 3999, the first digit is 3 and the total number of digits is 4. The logical numbers can be the same first digit and total number of digits. Remember, use the same tenant number that was configured for Roamer.
This command is then used to associate the first digit, assigned through ANPD, with a kind of service. In ASPA, assign the logical and physical number(s) from ANPD to STN – Station Number Level. Use the tenant number configured for Roamer and the same connection status index that was used in ANPD.
Finally, this command is used to associate each physical (station) number from ANPD to the actual Dterm, or station, Line Equipment Number (LENS) and
telephone class. Again, use the same tenant number.
Note: Now that MAT assignments for logical and physical numbers are complete and correspond to the Roamer database, when a telephone user enters a logical num- ber, the NEAX performs the following processes:
a.It reads the first digit and the total number of digits according to the ANPD assignment.
b.It finds that the first digit is assigned to station service through the ASPA.
c.It checks to see if the Free Location Feature (FLF) is enabled.
d.If FLF is enabled, from its database Roamer provides the physical number associated to that logical number.
e.Then the NEAX reads the ASDT to find out what actual Dterm is associated to that physical number and makes the change in assignment.
Roamer is installed and ready to be initialized. Enter the APM Operations Menu and initialize Roamer through the
Page 18 |
