MAT Assignments | Roamer Installation Guide |
AOKC Command: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its operation code that was configured in the APM for Roamer to one of the 14 OAI Key Codes in the MAT.
1.Select an unused OAI Key Code from 1 to 14. To determine what Key Codes are available for assignment, use the LOKC command to list the AOKC Key Codes that are already assigned.
2.Enter MSF as the facility to be assigned to the selected Key Code, using the val- ues on the screen.
3.Enter the same
AKY1 Command: (Assignment of Dterm Function Key)
This command is used to assign key data on the Dterms that are to have access to
Roamer.
MAT Function Key Indexes #34 to #47 have been designated for use in the OAI
system and correspond to the 14 OAI Key Codes as illustrated on the previous page. The AKY1 command is used to assign a Dterm function key to the specific
MAT Function Key Index that, in turn, corresponds to the previously assigned OAI Key Code. This command must be used to assign the function key on each Dterm
that is to be set up with access to Roamer.
1.Enter the same tenant number that is configured for Roamer in the APM Appli- cation Configuration option (i.e., Tenant Number on page 8).
2.Enter the station number of the Dterm on which the function key is being as- signed.
3.Enter to the Dterm function key field the MAT Function Key Index that corre- sponds to the previously assigned OAI Key Code.
Page 16 |
