114Chapter 6 Command line interface
show ports stats pos linkstatus
This command displays current statistics (Figure 43) on the frames coming across the PPP link. The command uses the syntax:
show ports stats pos linkstatus [<ports>]
Figure 43 show ports stats pos linkstatus command output
=========================================================================
POS Link Stats
=========================================================================
PORT | BAD ADDR | BAD CNTL | TOO LONG | BAD FCS |
|
NUM | FRAMES | FRAMES | FRAMES | FRAMES | MRU |
10/1 | 0 | 0 | 0 | 1936 | 1936 |
10/3 | 0 | 0 | 0 | 0 | 0 |
Table 44 describes the information fields for output of the show ports stats pos linkstatus command.
Table 44 Information fields for output of the show ports stats pos linkstatus command
Field | Description |
|
|
PORT NUM | Port number. |
|
|
BAD ADDR FRAMES | Number of packets received with an Incorrect Address Field. |
| This counter is a Component of the ifInErrors variable that is |
| associated with the interface that represents this PPP Link. |
|
|
BAD CNTL FRAMES | Number of packets received on this link with an incorrect |
| address field. |
|
|
TOO LONG FRAMES | Number of packets received and discarded because their |
| length exceeded the MRU. |
|
|
BAD FCS FRAMES | Number of packets received with an incorrect FCS size. |
|
|
MRU | Maximum Receive Unit |
|
|
