Chapter 6 Command line interface 103
.
Table 36 Information fields for output of the show ports info pos all command
Field | Description | |
|
| |
PORT NUM | Port number. | |
|
| |
FRAMING MODE | Indicates whether the framing mode is either: | |
| • | sonet |
| • | sdh |
|
| |
CLOCK SOURCE | Indicates whether the clock source is either: | |
| • | line |
| • | internal |
|
| |
SECTION TRACE | Indicates the integer that the section trace flag (j0) is set to. | |
|
| |
SIGNAL LABEL | Operational value of Path Signal Label (C2). The signal | |
| label value is reset when the scramble value is changed. | |
|
| |
SCRAMBLE | Enables or disables the scrambling option. | |
|
| |
ADMIN STATUS | Sets the port to one of the following states: | |
| • | up |
| • | down |
| • | testing |
|
| |
BRIDGE ADMIN | This parameter indicates bridged traffic within PPP. | |
|
| |
IP ADMIN | This parameter indicates the IP traffic (link) within PPP. | |
|
| |
IPX ADMIN | This parameter indicates the IPX traffic (link) within PPP. | |
|
| |
MAGIC NUMBER | If set to enable, selects a random number (“magic | |
| number”) used in loopback detection. enable detects | |
| loopback; disable does not detect loopback. | |
|
| |
STPMODE | Spanning Tree Protocol mode - This parameter enables | |
| BPDUs to be received or transmitted with BPDU specific | |
| encapsulation. When disabled, encapsulated within | |
| Ethernet frames. | |
|
| |
PPP LQSTATUS | Sets the link quality reporting interval. | |
|
| |
SPEED | Displays the current operating speed of the port. It can be | |
| either 155 or 622 Mb/s depending on the type of interface | |
| installed. | |
|
|
|
