118Chapter 6 Command line interface
Table 47 describes the information fields for output of the show ports stats pos pathinterval command.
Table 47 Information fields for output of the show ports stats pos pathinterval command
Field | Description |
|
|
PORT NUM | Port number. |
|
|
ERRORED SECONDS | Errored Second (ES) is a second with one or more Coding |
COUNT (ES) | Violations (CV) or one or more incoming defects (for |
| example, SEF, LOS, AIS, LOP). |
|
|
SEVERELY ERRORED | Severely Errored Second (SES) is a second with x or more |
COUNT (SES) | CVs, or one or more incoming defects. |
|
|
CODE VIOLATION COUNT | Coding Violations (CV) are Bit Interleaved Parity (BIP) |
errors that are detected in the incoming signal. CV | |
| counters are incremented for each BIP error detected. |
|
|
UNAVAILABLE SECONDS | Number of seconds that the interface is unavailable. |
(UAS) |
|
|
|
INTERVAL ID | Specified interval. |
|
|
show ports stats pos pppiftbl
This command displays statistics (Figure 47) on the PPP link. The command uses the syntax:
show ports stats pos pppiftbl [<ports>]
