
104Chapter 6 Command line interface
Table 36 Information fields for output of the show ports info pos all command (continued)
Field | Description |
|
|
MRU | Size (in octets) of the largest packet that can be sent or |
| received on the interface. For IPCP and IPXCP, the |
| maximum is 1936. When BCP is enabled, however, the |
| maximum is 1934. Check which NCP is enabled before |
| configuring the Mru. |
| Note: The Bridge Control Protocol (BCP) is enabled on the |
| Passport 8683POS Module by default. |
|
|
FCS SIZE | Sets the length of the redundancy check (fcs) to either 32 |
| or 16. |
|
|
IPX ROUTE PROTOCOL | Sets the protocol for IPX routing. |
|
|
Indicates the link quality reporting threshold. | |
|
|
Indicates the link quality reporting interval. | |
|
|
REMOTE IP | Indicates the remote iP address. |
|
|
IPX NET ADDR | Indicates the IPX net address. |
|
|
STATUS OPERATE | Operational status. |
|
|
LCP STATUS | Link Control Protocol status. |
|
|
BRIDGE STATUS | Bridging status. |
|
|
IP STATUS | Routing (IP) status. |
|
|
IPX STATUS | Routing (IPX) status |
|
|
PPP LQSTATUS | |
|
|
show ports stats pos activealarms
This command displays active alarms on the Passport 8683POS Module port. The command uses the syntax:
show ports stats pos activealarms [<ports>]