Chapter 6 Command line interface 115
show ports stats pos lqrstatus
This command displays current statistics (Figure 44) on the link quality reporting. The command uses the syntax:
show ports stats pos lqrstatus [<ports>]
Figure 44 show ports stats pos lqrstatus command output
===========================================================================
POS Link Quality Stats
===========================================================================
PORT
NUM QUALITY IN GOOD OCTs LOCAL PERIOD REMOTE PERIOD OUTLQRs INLQRs
10/5 | 100 | 4793094 | 100 | 100 | 40665 | 40666 |
10/6 | 0 | 0 | 0 | 0 | 0 | 0 |
Table 45 describes the information fields for output of the show ports stats pos lqrstatus command.
Table 45 Information fields for output of the show ports stats pos lqrstatus command
Field | Description |
|
|
PORT NUM | Port number. |
|
|
QUALITY | Number of quality issues. |
|
|
IN GOOD OCTs | Number of good octets received at the port. |
|
|
LOCAL PERIOD | Time interval in 100th of a second between link quality |
| reporting from the local end. |
|
|
REMOTE PERIOD | Time interval in 100th of a second between link quality |
| reporting from the remote end. |
|
|
OUT LQRs | Value of the OutLQRs counter on the local node for the |
| link. |
|
|
INLQRs | Value of the InLQRs counter on the local node for the link. |
|
|
