Chapter 6 Command line interface 105
Figure 36 show ports stats pos activealarms command output
=======================================================
Active Alarms
=======================================================
PORT
NUM ACTIVE ALARM
10/5 No Defect
10/6 LOS
Table 37 describes the information fields for output for the show ports stats pos activealarms command.
Table 37 Information fields for output of the show ports stats pos activealarms command
Field | Description |
|
|
PORT NUM | Port number. |
|
|
ACTIVE ALARM | Displays which port has active alarms. |
|
|
show ports stats pos felinecurrent
This command displays current statistics on the far end line, which is at the receiving end. The command uses the syntax:
show ports stats pos felinecurrent [<ports>]
