Nortel Networks manual Managing the Passport 8683POS Module Interface tab items

58Chapter 4 Managing the Passport 8683POS Module

Table 10 Interface tab items (continued)

Item	Description
LastChange	Value of sysUpTime at the time the interface entered its current
	operational state. If the current state was entered prior to the last
	reinitialization of the local network management subsystem, the value
	is zero.
LinkTrap	Sets whether or not link Up/link Down traps should be generated for
	this interface.
	• enabled—sends traps for link up or down
	• disabled—does not send traps for link up or down
OperDuplex	Current operational duplex of the port (half or full). This will always be
	full duplex on a POS port.
OperSpeed	Current operating speed of the port. It can be either 155 or 622 Mb/s
	depending on the type of interface installed.
MltId	Multi-Link Trunk to which the port is assigned (if any).
Locked	Displays whether or not the port is locked. When locked, the port
	configuration cannot be changed. To lock or unlock a port, select Edit
	> Security > Port Lock.
Action	Sets one of the following port-related actions:
	• none
	• flushMacFdb—flush MAC forwarding table for port
	• flushArp—flush ARP table for port
	• flushIp—flush IP route table for port
	• flushAll—flush all tables for port
	• triggerRipUpdate—manually update the RIP table
Result	Displays results from the last system action.

From the Interface tab, select other POS-specific tabs to configure the port or change current or default configurations.

209564-A