70Chapter 4 Managing the Passport 8683POS Module
Table 15 Basic tab fields (continued)
Field | Description |
|
|
SubnetAddr | IP subnet address of this VLAN. This value is meaningful only if |
| rcVlanType is equal to byIpSubnet(2). For other VLAN types it |
| should have the value 0.0.0.0. |
|
|
SubnetMask | IP subnet mask of this VLAN. This value is meaningful only if |
| rcVlanType is equal to byIpSubnet(2). For other VLAN types it |
| should have the value 0.0.0.0. |
|
|
bTo assign the POS ports to the VLAN as static members, enter the ports in the StaticMembers column.
cTo assign all other ports to the VLAN as active members, enter the ports in the ActiveMembers column.
dEnter the POS ports in the NotAllowToJoin column.
eClick Apply.
5To disable bridging:
a Click the POS PPP tab.
b In the Bridge area, BridgeConfigAdminStatus field, click Close.
6To enable IPX routing on each selected port: a Click the POS PPP tab.
b In the IPX area, IpxcpAdminStatus field, click Open.
7To enable the port on both Passport 8683POS Modules: a Click the Interface tab.
b In the AdminStatus field, click Up.
8Click Apply.
