Chapter 6 Command line interface 99
Show commands
This section describes the show commands available with the Passport 8683POS Module. These commands allow you to view information about the module:
show ports info pos [<ports>]
show ports stats pos activealarms [<ports>]
show ports stats pos felinecurrent [<ports>]
show ports stats pos felineinterval <intervalid> [<ports>]
show ports stats pos fepathcurrent [<ports>]
show ports stats pos fepathinterval <intervalid> [<ports>]
show ports stats pos linecurrent [<ports>]
show ports stats pos lineinterval <intervalid> [<ports>]
show ports stats pos linkstatus [<ports>]
show ports stats pos lqrstatus [<ports>]
show ports stats pos pathcurrent [<ports>]
show ports stats pos pathinterval <intervalid> [<ports>>]
show ports stats pos pppiftbl [<ports>]
show ports stats pos sectioncurrent [<ports>]
show ports stats pos sectioninterval <intervalid> [<ports>]
show ports stats pos sonetmediumtbl [<ports>]
show tech
Refer to the Reference for the Passport 8000 Series Command Line Interface Routing Operations, Release 3.1 and Reference for the Passport 8000 Series Command Line Interface Switching Operations, Release 3.1 for a complete list of CLI commands.
