
110Chapter 6 Command line interface
Figure 40 show ports stats pos fepathinterval command output
=========================================================================
POS Far End Path Interval Stats
=========================================================================
PORT | ERRORED SECONDS | SEVERELY ERRORED | CODE VIOLATION | UNAVAILABLE |
NUM | COUNT (ES) | COUNT (SES) | COUNT | SECONDS(UAS) |
10/1 | 0 | 0 | 0 | 0 |
10/3 | 0 | 0 | 0 | 900 |
INTERVAL ID = 1
Table 41 describes the information fields for output of the show ports stats pos fepathinterval command.
Table 41 Information fields for output of the show ports stats pos fepathinterval command
Field | Description |
|
|
PORT NUM | Port number. |
|
|
ERRORED SECONDS | Errored Second (ES) is a second with one or more Coding |
COUNT (ES) | Violations (CV) or one or more incoming defects (for |
| example, SEF, LOS, AIS, LOP). |
|
|
SEVERELY ERRORED | Severely Errored Second (SES) is a second with x or more |
COUNT (SES) | CVs, or one or more incoming defects. |
|
|
CODE VIOLATION COUNT | Coding Violations (CV) are Bit Interleaved Parity (BIP) |
errors that are detected in the incoming signal. CV | |
| counters are incremented for each BIP error detected. |
|
|
UNAVAILABLE SECONDS | Number of seconds that the interface is unavailable. |
(UAS) |
|
|
|
INTERVAL ID | Specified interval. |
|
|