Toshiba 281C, 451C, 351C manual STUDIO281c/351c/451c Error Code and SELF-DIAGNOSTIC Mode

Digital			Contents
	Button	Items to check	Highlighted display	Normal display
key			e.g.	e.g.
	A	LCF end fence home position sensor	Fence home posi-	Other than home
			tion	position
	B	LCF end fence stop position sensor	Fence stop position	Other than stop
				position
	C	Empty sensor at LCF standby side	No paper	Paper present
[5]	D	LCF side cover open/close switch	Cover closed	Cover opened
	E	LCF motor rotation status (Motor is rotating at	Abnormal rotation	Normal rotation
		output mode (03))
	F	LCF tray-up sensor	Tray at upper limit	Other than upper
			position	limit position
	G	LCF feed sensor	No paper	Paper present
	H	Empty sensor at LCF feed side	No paper	Paper present
	A	Lower drawer detection switch	Drawer not installed	Drawer present
	B	Upper drawer detection switch	Drawer not installed	Drawer present
	C	Lower drawer paper stock sensor	Paper almost empty	Paper present
	D	Upper drawer paper stock sensor	Paper almost empty	Paper present
[6]	E	Lower drawer empty sensor	No paper	Paper present
	F	Upper drawer empty sensor	No paper	Paper present
	G	Lower drawer tray-up sensor	Tray at upper limit	Other than upper
			position	limit position
	H	Upper drawer tray-up sensor	Tray at upper limit	Other than upper
			position	limit position
	A	-	-	-
	B	-	-	-
	C	-	-	-
[7]	D	-	-	-
	E	Side cover open/close switch	Cover opened	Cover closed
	F	Front cover opening/closing switch	Cover opened	Cover closed
	G	-	-	-
	H	Exit sensor	Paper present	No paper
	A	Bypass feed paper width sensor 3	Bit 1	Bit 0
		(Refer to table1)
	B	Bypass feed paper width sensor 2	Bit 1	Bit 0
		(Refer to table1)
	C	Bypass feed paper width sensor 1	Bit 1	Bit 0
[8]		(Refer to table1)
	D	Bypass feed paper width sensor 0	Bit 1	Bit 0
		(Refer to table1)
	E	Bypass sensor	No paper	Paper present
	F	ADU opening/closing switch	ADU opened	ADU closed
	G	ADU exit sensor	Paper present	No paper
	H	ADU entrance sensor	Paper present	No paper

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 28