Toshiba 451C, 281C, 351C manual Side Color 187 277-3 Reverse

Adjustment mode (05)

					Default			Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM	Contents	cedur
	cation			tion	able			e
					value>
254	Transfer	2nd transfer	-Low	ALL	-500	M	Transformer output set-	1
		roller bias out-			<-9999-		ting of the 2nd transfer
		put voltage			0>		roller bias (minus out-
							put).
255			-High	ALL	-2000	M	When replacing the	1
					<-9999-		high-voltage trans-
					0>		former, the values listed
							in attached data sheet
							are entered.
							(Unit: V)
270	Transfer	Temperature/humidity sen-		ALL	23	M	The temperature of the	2
		sor Temperature display			<0-100>		inside of the equipment
							is displayed.
							[Unit: °C]
275	Transfer	2nd transfer	(+)	ALL	147	M	Displays the value of	2
		roller bias			<0-255>		2nd transfer roller bias
		actual value					when printing is oper-
276			(-)	ALL	229	M		2
		(When clean-			<0-255>		ated.
		ing the roller)
277-0	Transfer	2nd transfer	Single	ALL	159	M	Displays the value of	10
		roller bias	side	(black)	<0-187>		2nd transfer roller bias
		actual value					when printing is oper-
277-1			Reverse	ALL	134	M		10
		display (Plain	side at	(black)	<0-187>		ated.
		paper)	duplexing
277-2			Single	ALL	147	M		10
			side	(color)	<0-187>
277-3			Reverse	ALL	128	M		10
			side at	(color)	<0-187>
			duplexing
279-0	Transfer	2nd transfer	Single	ALL	144	M	Displays the value of	10
		roller bias	side	(black)	<0-187>		2nd transfer roller bias
		actual value					when printing is oper-
279-1			Reverse	ALL	119	M		10
		display (Thick	side at	(black)	<0-187>		ated.
		paper 1)	duplexing
279-2			Single	ALL	125	M		10
			side	(color)	<0-187>
279-3			Reverse	ALL	112	M		10
			side at	(color)	<0-187>
			duplexing
281	Transfer	1st transfer roller bias		ALL	-	M	The RMS value of the	2
		resistance detection con-			<0-255>		main charger grid bias
		trol					is displayed..
284	Transfer	Transfer belt cleaning unit		ALL	141	M	When the value	1
		contact timing adjustment			<88-168>		increases, the contact
							timing of transfer belt
							cleaning unit is delayed.
285	Transfer	Transfer belt cleaning unit		ALL	121	M	When the value	1
		release timing adjustment			<88-168>		increases, the release
							timing of transfer belt
							cleaning unit is delayed.
290-0	Transfer	2nd transfer roller bias off-		ALL	153	M	Displays the value of	10
		setting adjustment		(black)	<0-187>		2nd transfer roller bias
		(Thick paper 2)					when printing is oper-
290-1				ALL	150	M		10
				(color)	<0-187>		ated.

© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 45