Toshiba 451C, 281C, 351C manual Monitor/Pause

			Setting mode (08)
					Default			Pro-
	Classifi-			Func-	<Accept-
Code			Items			RAM	Contents	cedur
	cation			tion	able			e
					value>
1141	Network		Display of MAC address	ALL	-	SYS	(**:**:**:**:**:**)	2
							The address is dis-
							played as above (6-byte
							data is divided by a
							colon at every 2 bytes).
1143	Network		NetwareUserAuthContext	ALL	-	UTY	Maximum 127 letters	12
			Name2
1144	Network		NetwareUserAuthTree	ALL	-	UTY	Maximum 47 letters	12
			Name3
1145	Mainte-		Counter notification	ALL	-	SYS	Maximum 32 digits	11
	nance		Remote FAX setting				Enter a hyphen with the
	(Remote)						[MONITOR/PAUSE]
							button.
1148	Network		NetwareUserAuthContext	ALL	-	UTY	Maximum 127 letters	12
			Name3
1370	Image		Image quality control time	ALL	0	M	Counts driving count of	1
	process-		accumulating counter		<8 digits>		the drum (image qual-
	ing						ity control time).
							Counts up when drum
							motor and image quality
							control are ON.
1371	Image		Accumulated counter of	ALL	0	M	Cleared to “0” by the	2
	process-	output pages since the per-			<4 digits>		image quality closed-
	ing		forming of image quality				loop control. Counts up
			control				with the number of
							printing job received
							after this control.
1372	Image		Heater and energizing time	ALL	0	M	Counts up the heater	1
	process-		accumulating counter Dis-		<8 digits>		control time accumu-
	ing		play/0 clearing				lated (when power of
							the copier is ON) but
							does not count at the
							Sleep Mode. When the
							counter value of the
							fuser belt is cleared,
							this counter value is
							also cleared in sync at
							PM support mode.
1378	Image		Fuser roller ready tempera-	ALL	0	M	Counts up the heater	2
	process-		ture time accumulating		<8 digits>		control time accumu-
	ing		counter				lated (on standby).
							When the counter value
							of the fuser belt is
							cleared, this counter
							value is also cleared in
							sync at PM support
							mode.
1380	Image		Fuser roller printing tem-	ALL	0	M	Counts up the heater	2
	process-	perature time accumulating			<8 digits>		control time accumu-
	ing		counter				lated (during printing).
							When the counter value
							of the fuser belt is
							cleared, this counter
							value is also cleared in
							sync at PM support
							mode.
© June 2005 TOSHIBA TEC				e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
				2 - 153

2

05/11