Toshiba 451C, 281C, 351C manual Ppc Eur Sys, Comp JPN

Setting mode (08)

						Default					Pro-
	Classifi-				Func-	<Accept-
Code		Items					RAM			Contents	cedur
	cation				tion	able					e
						value>
603	User	Setting for automatic			ALL	0	SYS	0:		Invalid	1
	interface	duplexing mode				<0-3>		1:		Single-sided to
										duplex copying
									2: Two-sided to duplex
								3:		copying
										User selection
604	User	Default setting for APS/			ALL	0	SYS		0: APS (Automatic		1
	interface	AMS				<0-2>				Paper Selection)
									1: AMS (Automatic
										Magnification Selec-
								2:		tion)
										Not selected
605	User	Centering printing of pri-			PPC	1	SYS	0:		Invalid	1
	interface	mary/secondary direction				<0-1>		1:		Valid
		at AMS
607	User	Default setting of RADF			PPC	0	SYS		0: Continuous feeding		1
	interface	mode				<0-1>				(by pressing the
								1:		[START] button)
										Single feeding
										(by setting original
										on the tray)
609-0	Image	Binarizing		Step -2	ALL	88	SYS		Sets the binarizing level		4
		level setting				<0-255>			of each step.
609-1		(When judg-		Step -1	ALL	108	SYS		When the value		4
		ing as black in				<0-255>			increases, the image
		the ACS							becomes darker. When
609-2				Step 0	ALL	148	SYS				4
		Mode)		(center)		<0-255>			the value decreases,
									the image becomes
609-3				Step +1	ALL	178	SYS				4
									lighter.
						<0-255>			*	Refer to 08-268.
609-4				Step +2	ALL	208	SYS				4
						<0-255>
610	User	Key touch sound	of control		ALL	1	SYS		0: OFF		1
	interface	panel				<0-1>		1:		ON
611	User	Book type original priority			PPC	0	SYS	0:		Left page to right	1
	interface					<0-1>		1:		page
										Right page to left
										page
612	General	Summer time mode			ALL	0	SYS		0: Not summer time		1
						<0-1>			1: Summer time
613	User	Paper size selection for			PPC	EUR:	SYS		Press the icon on the		9
	interface	[OTHER] button				FOLIO			LCD to select the size.
						UC:
						COMP
						JPN:
						A5-R
614	Network	Local I/F time-out period			ALL	6	SYS		Sets the period of time		1
						<1-50>			when the job is judged
									as completed in local I/
									F printing (USB or par-
									allel).
								1:		1.0 sec.
								2:		1.5 sec.
									50: 25.5 sec.
									(in increments of 0.5
									sec.)

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 126