Toshiba 351C, 451C, 281C manual Test print mode test mode

2.2.3Test print mode (test mode 04)

The embedded test pattern can be printed out by keying in the following codes in the test print mode (04).

<Procedure 1>

ÅðÃÅìà øݱ¼»÷ ÅÍÌßÎÌà Ѱ»®¿¬·±² ÅÝÔÛßÎà ÅÐÑÉÛÎà ÑÚÚñÑÒ

ÅÐÑÉÛÎÃݱ²¬·²«±«-øÛ¨·¬÷ Ì»-¬ Ю·²¬·²¹

<Procedure 2>

ÅðÃÅìÃ	øݱ¼»÷		ÅÍÌßÎÌÃ		ݱ´±®		ÅÍÌßÎÌÃ	Ñ°»®¿¬·±²	ÅÝÔÛßÎÃ		ÅÐÑÉÛÎà ÑÚÚñÑÒ
ÅÐÑÉÛÎÃ
				-»´»½¬·±²		ݱ²¬·²«±«-				øÛ¨·¬÷
		ÅÝÔÛßÎÃ				Ì»-¬ Ю·²¬·²¹

Notes:

1.When an error occurs, it is indicated on the panel, but the recovery operation is not per- formed.

Turn OFF the power and then back ON to clear the error.

2.During test printing, the [CLEAR] button is disabled when “Wait adding toner” is displayed.

Code	Types of test pattern	Remarks	Remarks
142	Grid pattern (black)	Pattern width: 2 dots, Pitch: 10 mm	1
204	Grid pattern (color)	Pattern width: 1 dot, Pitch: 10 mm	2
219	6% test pattern		2
220	8% test pattern		2
231	Secondary scanning direction 33 grada-	3 pixels standard, Width: 10 mm	2
	tion steps
237	Halftone		2
250	Test pattern for KCMY secondary scan-	For color deviation check	1
	ning position adjustment
262	Pattern for jitter evaluation	1 pixel standard, for color deviation cor-	2
	(4 lines ON / 4 lines OFF)	rection
270	Image quality control test pattern	For checking the image quality control	2

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 38

06/08