Toshiba 281C, 451C, 351C manual Fax Sys

		Setting mode (08)
				Default				Pro-
	Classifi-		Func-	<Accept-
Code		Items			RAM		Contents	cedur
	cation		tion	able				e
				value>
615	General	Size information of main	ALL	-	SYS	Displays the sizes of		2
		memory and page memory				the main memory and
						page memory. Enables
						to check if each mem-
						ory is properly recog-
						nized.
616	Counter	Counting method in Twin	ALL	JPN: 1	SYS	Sets the counting		1
		Color Mode		UC: 0		method in Twin Color
		(Limitation Function)		EUR: 0		Mode with the Limita-
				<0-1>		tion Function.
						0: Count as color
						1: Count as black
617	User	Print setting without	ALL	1	SYS	0:	Printed forcibly	1
	interface	department code		<0-2>		1:	Not printed
						2:	Deleted forcibly
618	User	Default setting of RADF	PPC	0	SYS	0:	Same size originals	1
	interface	original size		<0-1>		1:	Mixed size originals
619	Paper	Time lag before auto-start	ALL	4	SYS	Sets the time taken to		1
	feeding	of bypass feeding		<0-10>		add paper feeding
						when paper in the
						bypass tray has run out
						during the bypass feed
						copying.
						0: Paper is not drawn
							in unless the
							[START] button is
							pressed.
						1-10: Setting value x
							0.5sec.
620	User	Department management	PPC	1	SYS	0: Invalid		1
	interface	setting (Copier)		<0-1>		1: Valid
621	User	Department management	FAX	1	SYS	0: Invalid		1
	interface	setting (FAX)		<0-1>		1: Valid
622	User	Department management	PRT	1	SYS	0: Invalid		1
	interface	setting (Printer)		<0-1>		1: Valid
623	User	Department management	SCN	1	SYS	0: Invalid		1
	interface	setting (Scanner)		<0-1>		1: Valid
624	User	Department management	PRT	1	SYS	0: Invalid		1
	interface	setting (List print)		<0-1>		1: Valid
625	User	Blank copying prevention	PPC	0	SYS	0: OFF		1
	interface	mode during RADF jam-		<0-1>		1: ON (Start printing
		ming					when the scanning
							of each page is fin-
							ished)
627	User	Rotation printing at the	ALL	0	SYS	0:	Not rotating	1
	interface	nonsorting		<0-1>		1:	Rotating
628	User	Direction priority of original	PPC	0	SYS	0:	Automatic	1
	interface	image		<0-1>		1:	Portrait
629	User	Department management	ALL	0	SYS	0:	Invalid	1
	interface	setting		<0-1>		1:	Valid
632	User	Automatic calibration dis-	PPC	1	SYS	Sets the disclosing level		1
	interface	closure level		<0-2>		of automatic calibration.
						0:	Service technician
						1:	Administrator
						2: User
© June 2005 TOSHIBA TEC			e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 127