Toshiba 281C, 451C, 351C manual Prt, Ppc

			Adjustment mode (05)
					Default			Pro-
Code	Classifi-	Items		Func-	<Accept-	RAM	Contents
								cedur
	cation			tion	able			e
					value>
391-0	Image	Output value	Lowden-	ALL	0	M	Displays the output	10
	control	display of	sity pat-		<0-1023>		value of image quality
		image quality	tern Y				sensor when a low-den-
		sensor					sity test pattern is writ-
391-1			Lowden-	ALL	0	M		10
			sity pat-		<0-1023>		ten.
			tern M				The larger the value is,
							the smaller the toner
391-2			Lowden-	ALL	0	M		10
							amount adhered
			sity pat-		<0-1023>
							becomes.
			tern C
391-3			Lowden-	ALL	0	M		10
			sity pat-		<0-1023>
			tern K
392	Image	Light amount	adjustment	ALL	0	M	The LED light amount	2
	control	result of image quality sen-			<0-255>		adjustment value of this
		sor					sensor is the reference
							value to set the
							reflected light from the
							belt surface.
393	Image	Relative humidity display		ALL	0	M	Displays the relative	2
	control	during latest closed-loop			<0-100>		humidity at the latest
		control					performing of the
							closed-loop
							control.
394	Image	Enforced performing of		ALL	-	-	Performs the image	6
	control	image quality open-loop					quality open-loop con-
		control					trol.
395	Image	Enforced performing of		ALL	-	M	Performs the image	6
	control	image quality closed-loop					quality closedloop con-
		control					trol.
396	Image	Image quality control initial-		ALL	-	M	Performs the image	6
	control	ization					quality control, initialize
							each control value.
398-0	Image	Target value	Y	ALL	265	M	Sets the target value of	4
	control	of the high			<220-		high image density con-
		image den-			360>		trol at the time of the
		sity control					image quality control.
398-1			M	ALL	300	M		4
					<220-
					360>
398-2			C	ALL	320	M		4
					<220-
					360>
398-3			K	ALL	370	M		4
					<300-
					420>
401	Laser	Fine adjustment	of polygo-	PRT	134	M	When the value	1
		nal motor rotation speed			<0-255>		increases by “1”, the
		(reproduction ratio adjust-					reproduction ratio of pri-
405				PPC	135	M		1
		ment)			<0-255>		mary scanning direction
							increases by approx.
							0.07%. (approx. 0.1
							mm/step)
410	Laser	Adjustment of primary		PPC	128	M	When the value	1
		scanning laser writing start			<0-255>		increases by “1”, the
		position					writing start position
411				PRT	120	M		1
					<0-255>		shifts to the front side
							by approx. 0.0423 mm.
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE							© June 2005 TOSHIBA TEC

2 - 52