Toshiba 351C, 451C, 281C manual Color 100V +100V +200V +300V +400V 10 +500V

			Adjustment mode (05)
					Default				Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM	Contents		cedur
	cation			tion	able				e
					value>
1831	Transfer	1st transfer roller bias		ALL	187	M	Displays the value of		2
		actual value display at		(black)	<0-255>		1st transfer roller bias
		deceleration					at deceleration when			2
		(Thick paper 2)					the actual printing is
1832	Transfer	1st transfer roller bias		ALL	187	M	operated.		2
		actual value display at		(black)	<0-255>		(The value corrected in
		deceleration					05-1829 is displayed.)
		(Thick paper 3)
1833	Transfer	1st transfer roller bias		ALL	187	M			2
		actual value display at		(black)	<0-255>
		deceleration
		(OHP film)
1836	Transfer	1st transfer roller bias		ALL	178	M	Displays the actual		2
		actual value display in low-		(color)	<0-255>		value of the 1st transfer
		speed color printing					roller bias when the
		(Plain paper / Thick paper					transfers of all colors (Y,
		1)					M, C and K) have fin-
							ished.
							This adjustment is valid
							only when the value of
							the code 08-497 is “1”
							(6 pages/minute).
1839-0	Transfer	2nd transfer	Intermedi-	ALL	100	M	Corrects the 2nd trans-		14
		roller bias cor-	ate level		<0-100>		fer roller bias output of
		rection of	bias of				leading/trailing edge of
		leading/trail-	trailing				paper (05-1840).
		ing edge of	edge				(Correcting factor: %)
1839-1		paper	Bias of	ALL	90	M			14
		(Tab paper)	leading/		<0-100>
			trailing
			edge
1840-0	Transfer	2nd transfer roller bias		ALL	153	M	As the value decreases,		14
		output adjustment		(black)	<0-187>		the 2nd transfer roller
		(Tab paper)					bias output increases
							correspondingly.
							The adjustment value
1840-1				ALL	150	M			14
				(color)	<0-187>		becomes effective
							when the Setting Mode
							(08-544, 549 and 551)
							is 0 (invalid).
1841-0	Transfer	2nd transfer roller bias		ALL	5	M	Sets the offset amount		4
		offsetting adjustment		(black)	<0-10>		of 2nd transfer roller
		(Tab paper)					bias.	1: -400V
							0: -500V
							2: -300V	3: -200V
1841-1				ALL	5	M			4
				(color)	<0-10>		4: -100V	5: 0V
							6: +100V	7: +200V
							8: +300V	9: +400V
							10: +500V

© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2 - 83