Toshiba 451C, 281C, 351C manual Radf ALL, All Sys

Adjustment mode (05)

						Default				Pro-
Code	Classifi-	Items			Func-	<Accept-	RAM		Contents
										cedur
	cation				tion	able				e
						value>
338	Image	Color developer bias DC			ALL	100	M		Transformer output cali-	1
	control	(-) calibration voltage 1				<70-130>			bration of the color
		(low)							developer bias. When
									replacing the high-volt-
339	Image	Color developer bias DC			ALL	900	M			1
	control	(-) calibration voltage 2				<810-			age transformer, the
		(high)				990>			values listed in attached
									data sheet are entered.
									(Unit: V)
340	Scanner	Reproduction ratio adjust-			ALL	127	SYS		When the value	1
		ment of secondary scan-				<0-255>			increases by “1”, the
		ning direction (scanner							reproduction ratio in the
		section)							secondary scanning
									direction (vertical to
									paper feeding direc-
									tion) increases by
									approx. 0.223%.
350	Scanner	Shading posi-		Original	ALL	128	SYS		0.1369 mm/step	1
		tion adjust-		glass		<118-
		ment				138>
351				RADF	ALL	128	SYS		0.1369 mm/step	1
						<118-
						138>
354	RADF	Adjustment of		for single-	ALL	10	SYS		When the value	1
		RADF paper		sided orig-		<0-20>			increases by “1”, the
		alignment		inal					aligning amount
355				for double	ALL	10	SYS		increases by approx.	1
				sided orig-		<0-20>			0.5 mm.
				inal
357	RADF	Fine adjustment	of RADF		ALL	50	SYS		When the value	1
		transport speed				<0-100>			increases by “1”, the
									reproduction ratio of the
									secondary scanning
									direction on original (fed
									from the RADF)
									increases by approx.
								0.1%.
358	RADF	RADF sideways deviation			ALL	128	SYS		When the value	1
		adjustment				<0-255>			increases by “1”, the
									image of original fed
									from the RADF shifts
									toward the rear side of
									paper by approx.
									0.0423 mm.
359	Scanner	Carriage position adjust-			ALL	128	SYS		When the value	1
		ment during scanning from			(black)	<0-255>			increases by “1”, the
		RADF							carriage position shifts
360					ALL	128	SYS			1
					(color)	<0-255>			by approx. 0.1 mm
									toward the exit side
									when using the RADF.

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 48

06/08