Toshiba 351C, 451C, 281C manual Contents Cedur Cation Tion Able Value 367

Adjustment mode (05)

					Default			Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM	Contents	cedur
	cation			tion	able			e
					value>
367	RADF	RADF original guide width		ALL	-	-	Stores the current width	6
		adjustment					of RADF original guide
		(Minimum)					by keying in this code
							with the guide set at the
							minimum width. Per-
							form this adjustment
							when the RADF board
							or volume is replaced,
							or when the code (05-
							356) is performed.
368	RADF	RADF original guide width		ALL	-	-	Stores the current width	6
		adjustment					of RADF original guide
		(Maximum)					by keying in this code
							with the guide set at the
							maximum width. Per-
							form this adjustment
							when the RADF board
							or volume is replaced,
							or when the code (05-
							356) is performed.
372	Image	Black developer bias DC		ALL	100	M	Transformer output cali-	1
	control	(-) calibration voltage 1			<70-130>		bration of the black
		(low)					developer bias. When
373	Image	Black developer bias DC		ALL	900	M	replacing the high-volt-	1
	control	(-) calibration voltage 2			<810-		age transformer, the
		(high)			990>		values listed in attached
							data sheet are entered.
							(Unit: V)
380-0	Image	Image quality	Y	ALL	320	M	Displays the contrast	10
	control	open-loop			<0-999>		voltage initial value set
		control/ con-					by the open-loop con-
380-1			M	ALL	330	M		10
		trast voltage			<0-999>		trol. (Unit: V)
		initial value
380-2			C	ALL	340	M		10
		display
					<0-999>
380-3			K	ALL	375	M		10
					<0-999>
381-0	Image	Contrast volt-	Y	ALL	320	M	Displays the contrast	10
	control	age actual			<0-999>		voltage when printing is
		value display					operated. (Unit: V)
381-1			M	ALL	330	M		10
					<0-999>
381-2			C	ALL	340	M		10
					<0-999>
381-3			K	ALL	375	M		10
					<0-999>
382-0	Image	Image quality	Y	ALL	408	M	Displays the laser	10
	control	open-loop			<0-999>		power initial value set
		control/ laser					by the open-loop con-
382-1			M	ALL	408	M		10
		power initial			<0-999>		trol. (Unit: µW)
		value display
382-2			C	ALL	408	M		10
					<0-999>
382-3			K	ALL	408	M		10
					<0-999>

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 50