
[FAX] button: ON/[COPY] button: OFF ([FAX] LED: ON/[COPY] LED: OFF)
Digital |
|
| Contents | ||
Button | Items to check | Highlighted display | Normal display | ||
key |
|
| e.g. | e.g. | |
|
|
| |||
|
|
|
|
| |
| A | 2nd transfer roller position detection sensor | Released | Contacted | |
| B | Black developer contact timing detection sensor | Releasing move- | Contacting move- | |
|
|
| ment | ment | |
| C | Black developer contact position detection sen- | Released position | Contacted position | |
|
| sor |
|
| |
| D | Main motor rotation status | Abnormal rotation | Normal rotation | |
[1] |
| (Motor is rotating at Output Mode (03)) |
|
| |
E | Developer motor rotation status | Abnormal rotation | Normal rotation | ||
| |||||
|
| (Motor is rotating at Output Mode (03)) |
|
| |
| F | Transport motor rotation status | Abnormal rotation | Normal rotation | |
|
| (Motor is rotating at Output Mode (03)) |
|
| |
| G | Polygonal motor rotation status | Abnormal rotation | Normal rotation | |
|
| (Motor is rotating at Output Mode (03)) |
|
| |
| H | 24V Power supply | Power OFF | Power ON | |
| A | IPC board connection | Not connected | Connected | |
| B | Color toner cartridge sensor | Normally | Installation fault | |
| C | Revolver home position sensor | Home position | Other than home | |
|
|
|
| position | |
[2] | D | - | - | - | |
| E | - | - | - | |
| F | Toner bag full detection sensor | Toner bag full | Not full | |
| G | Black | Not connected | Connected | |
| H | - | - | - | |
| A | - | - | - | |
| B | - | - | - | |
| C | - | - | - | |
[3] | D | - | - | - | |
E | - | - | - | ||
| |||||
| F | - | - | - | |
| G | Lower drawer feed sensor | No paper | Paper present | |
| H | Upper drawer feed sensor | Paper present | No paper | |
| A | - | - | - | |
| B | - | - | - | |
| C | - | - | - | |
[4] | D | - | - | - | |
E | Bridge unit connection | Not connected | Connected | ||
| |||||
| F | Color | Not connected | Connected | |
| G | - | - | - | |
| H | - | - | - |
| © June 2005 TOSHIBA TEC |
2 - 30