Toshiba 351C, 451C, 281C manual Sys

			Adjustment mode (05)
					Default			Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM	Contents	cedur
	cation			tion	able			e
					value>
305	Scanner	Image location adjustment		ALL	124	SYS	When the value	1
		of secondary scanning			<92-164>		increases by “1”, the
		direction					image shifts by approx.
		(scanner section)					0.137 mm toward the
							trailing edge of the
							paper.
306	Scanner	Image location adjustment		ALL	113	SYS	When the value	1
		of secondary scanning			<0-255>		increases by “1”, the
		direction					image shifts by approx.
		(scanner section)					0.0423 mm toward the
							front side of the paper.
308	Scanner	Distortion mode		ALL	-	-	Moves carriages to the	6
							adjusting position.
							(Chap. 3.4.4)
330-0	Image	Image quality	Y	ALL	3	M	Sets the maximum cor-	4
	control	closed-loop			<0-255>		rection number of time
		control con-					of the contrast voltage
330-1			M	ALL	3	M		4
		trast voltage			<0-255>		in the closed-loop con-
		correction/					trol mode 2.
330-2			C	ALL	3	M		4
		Mode 2 maxi-
					<0-255>
		mum number
330-3			K	ALL	3	M		4
		of time cor-
					<0-255>
		rected
331-0	Image	Image quality	Y	ALL	2	M	Sets the maximum cor-	4
	control	closed-loop			<0-255>		rection number of time
331-1		control laser	M	ALL	2	M	of the laser power in the	4
		power correc-			<0-255>		closed-loop control
		tion/Mode 2					mode 2.
331-2			C	ALL	2	M		4
		maximum
					<0-255>
		number of
331-3			K	ALL	2	M		4
		time corrected
					<0-255>
332-0	Image	Image quality	Y	ALL	1	M	Sets the maximum cor-	4
	control	closed-loop			<0-255>		rection number of time
332-1		control con-	M	ALL	1	M	of the contrast voltage	4
		trast voltage			<0-255>		in the closed-loop con-
		correction/					trol mode 1.
332-2			C	ALL	1	M		4
		Mode 1 maxi-
					<0-255>
		mum number
332-3			K	ALL	1	M		4
		of time cor-
					<0-255>
		rected
333-0	Image	Image quality	Y	ALL	1	M	Sets the maximum cor-	4
	control	closed-loop			<0-255>		rection number of time
		control laser					of the laser power in the
333-1			M	ALL	1	M		4
		power correc-			<0-255>		closed-loop control
		tion/Mode 1					mode 1.
333-2			C	ALL	1	M		4
		maximum
					<0-255>
		number of
333-3			K	ALL	1	M		4
		time corrected
					<0-255>
334	Image	Main charger grid calibra-		ALL	300	M	Transformer output cali-	1
	control	tion voltage 1 (low)			<210-		bration of the main
					390>		charger grid bias. When
							replacing the high-volt-
335	Image	Main charger grid calibra-		ALL	1000	M		1
	control	tion voltage 2 (high)			<900-		age transformer, the
					1100>		values listed in attached
							data sheet are entered.
							(Unit: V)
© June 2005 TOSHIBA TEC				e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 47