Toshiba 451C, 281C, 351C manual CBA0, CBB0

Error code	Classification	Contents	Troubleshooting
CB10	Finisher related	Entrance motor abnormality: The entrance motor is	P. 5-67
	service call	not rotating normally. [MJ-1101]
CB11		Buffer tray guide motor abnormality: The buffer tray	P. 5-67
		guide motor is not rotating or the buffer tray guide is
		not moving normally. [MJ-1101]
CB12		Buffer roller drive motor abnormality: The buffer	P. 5-67
		roller drive motor is not rotating or the buffer roller is
		not moving normally. [MJ-1101]
CB20		Delivery motor abnormality: Delivery motor or deliv-	P. 5-68
		ery roller is not rotating normally. [MJ-1022]
CB30		Tray 1/Tray 2 shift motor abnormality: Tray 1/Tray 2	P. 5-68
		shift motor is not rotating or delivery tray is not mov-
		ing normally. [MJ-1023/1024]
		Movable tray shift motor abnormality: The movable	P. 5-68
		tray shift motor is not rotating or the movable tray is
		not moving normally. [MJ-1101]
CB31		Movable tray paper-full detection error: The actua-	P. 5-69
		tor of the movable tray paper-full detection sensor
		does not move smoothly. [MJ-1101]
CB40		Rear aligning plate motor abnormality: Rear align-	P. 5-69
		ing plate motor is not rotating or aligning plate is not
		moving normally. [MJ-1023/1024]
		Front alignment motor abnormality: The front align-	P. 5-69
		ment motor is not rotating or the front alignment
		plate is not moving normally. [MJ-1101]
CB50		Staple motor abnormality: Staple motor is not rotat-	P. 5-70
		ing or stapler is not moving normally. [MJ-1022/
		1023/1024]
		Stapler home position error: The stapler home posi-	P. 5-70
		tion sensor does not work. [MJ-1101]
CB51		Stapler shift home position error: The stapler is not	P. 5-70
		at the home position. [MJ-1101]
CB60		Stapler shift motor abnormality: Stapler shift motor	P. 5-71
		is not rotating or staple unit is not moving normally.
		[MJ-1023/1024/1101]
CB80		Backup RAM data abnormality:	P. 5-71
		1) Abnormality of checksum value on finisher con-
		troller PC board is detected when the power is
		turned ON. [MJ-1023/1024]
		2) Abnormality of checksum value on punch con-
		troller PC board is detected when the power is
		turned ON. [MJ-1023/1024 (when MJ-6004 is
		installed)]
		RAM abnormality: Abnormality of checksum value	P. 5-71
		on finisher controller PC board is detected when the
		power is turned on. [MJ-1101]
CB81		Flash ROM abnormality: Abnormality of checksum	P. 5-72
		value on finisher controller PC board is detected
		when the power is turned on. [MJ-1101]
CB90		Paper pushing plate motor abnormality: Paper	P. 5-72
		pushing plate motor is not rotating or paper pushing
		plate is not moving normally. [MJ-1024]
CBA0		Stitch motor (front) abnormality: Stitch motor (front)	P. 5-72
		is not rotating or rotary cam is not moving normally.
		[MJ-1024]
CBB0		Stitch motor (rear) abnormality: Stitch motor (rear)	P. 5-72
		is not rotating or rotary cam is not moving normally.
		[MJ-1024]
© June 2005 TOSHIBA TEC		e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
		2 - 9

2

06/08