Toshiba 281C, 451C, 351C manual Service call

2.1.2Service call

Error code	Classification	Contents	Troubleshooting
C010	Drive system related	Main motor abnormality: The main motor is not	P. 5-52
	service call	rotating normally.
C020		Developer motor abnormality: The developer motor	P. 5-52
		is not rotating normally.
C030		Transport motor abnormality: The transport motor is	P. 5-52
		not rotating normally.
C040	Paper feeding system	PFP motor abnormality: The PFP motor is not rotat-	P. 5-53
	related service call	ing normally. (the case that paper can be fed from
		any drawer except the PFP)
C130		Upper drawer tray abnormality: The upper drawer	P. 5-54
		tray-up motor is not rotating or the upper drawer
		tray is not moving normally. (the case that paper
		can be fed from any drawer except the upper
		drawer)
C140		Lower drawer tray abnormality: The lower drawer	P. 5-54
		tray-up motor is not rotating or the lower drawer tray
		is not moving normally. (the case that paper can be
		fed from any drawer except the lower drawer)
C150		PFP upper drawer tray abnormality: The PFP upper	P. 5-55
		drawer tray-up motor is not rotating or the PFP
		upper drawer tray is not moving normally. (the case
		that paper can be fed from any drawer except the
		PFP upper drawer)
C160		PFP lower drawer tray abnormality: The PFP lower	P. 5-55
		drawer tray-up motor is not rotating or the PFP
		lower drawer tray is not moving normally. (the case
		that paper can be fed from any drawer except the
		PFP lower drawer)
C180		LCF tray-up motor abnormality: The LCF tray-up	P. 5-56
		motor is not rotating or the LCF tray is not moving
		normally. (the case that paper can be fed from any
		drawer except the LCF)
C1A0		LCF end fence motor abnormality: The LCF end	P. 5-57
		fence motor is not rotating or the LCF end fence is
		not moving normally. (the case that paper can be
		fed from any drawer except the LCF)
C1B0		LCF transport motor abnormality: The LCF trans-	P. 5-58
		port motor is not rotating normally. (the case that
		paper can be fed from any drawer except the LCF)
C260	Scanning system	Peak detection error: Lighting of the exposure lamp	P. 5-59
	related service call	(white reference) is not detected when power is
		turned ON.
C270		Carriage home position sensor not turning OFF	P. 5-59
		within a specified period of time: The carriage does
		not shift from its home position in a specified time.
C280		Carriage home position sensor not turning ON	P. 5-59
		within a specified period of time: The carriage does
		not reach to its home position in a specified period
		of time.
C360	Copy process related	Charger cleaner motor abnormality: Charger	P. 5-89
	service call	cleaner motor is not rotating or wire cleaner is not
		moving normally.

© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 7