Toshiba 351C, 451C, 281C manual Feeding OFF 483 Laser Pre-running rotation

		Setting mode (08)
				Default				Pro-
Code	Classifi-		Func-	<Accept-
		Items			RAM		Contents	cedur
	cation		tion	able				e
				value>
481	Paper	Automatic change of paper	PPC	1	SYS	Sets whether or not		1
	feeding	source		<0-2>		changing the drawer
						automatically to the
						other drawer with the
						paper of the same size
						when paper in the
						selected drawer has run
						out.
						0: OFF
						1: ON (Changes to the
							drawer with the
							same paper direc-
							tion and size: ex. A4
							to A4)
						2: ON (Changes to the
							drawer with the
							same paper size.
							Paper with the dif-
							ferent direction is
							acceptable as long
							as the size is the
							same: ex., A4 to A4-
							R, LT-R to LT. “1” is
							applied when the
							staple/holepunch is
							specified.)
482	Paper	Feeding retry setting	ALL	0	M	0: ON		1
	feeding			<0-1>		1: OFF
483	Laser	Pre-running rotation of	ALL	0	SYS	Sets whether or not		1
		polygonal motor		<0-2>		switching the polygonal
						motor from the standby
						rotation to the normal
						rotation when the origi-
						nal is set on the RADF
						or the platen cover is
						opened.
						0:	Valid (when using
							RADF and the origi-
						1:	nal is set manually)
							Invalid
						2:	Valid (when using
							RADF only)
484	Laser	Polygonal motor rotational	ALL	0	SYS	Sets whether or not		1
		status switching at the Auto		<0-1>		switching the polygonal
		Clear Mode				motor from the normal
						rotation to the standby
						rotation at the Auto
						Clear Mode.
						0:	Valid
						1:	Invalid
485	Laser	Rotational status of polygo-	ALL	0	SYS	Sets the rotational sta-		1
		nal motor on standby		<0-1>		tus of polygonal motor
						on standby.
						0: Rotated (The rota-
							tional speed is set at
							08-490.)
						1: Stopped
© June 2005 TOSHIBA TEC			e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 119