Toshiba 351C, 451C, 281C manual Lcf All Sys

			Setting mode (08)
					Default					Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM			Contents	cedur
	cation			tion	able					e
					value>
672	General	Initialization of department		-	-	SYS		Initializing of the depart-		3
		management information						ment management
								information			2
							*		Enter the code with
									the digital keys and
									press the [INITIAL-
									IZE] button to per-
									form the
									initialization.
									If the area storing
									the department
									management infor-
									mation is destroyed
									for some reason,
									“Enter Department
									Code” is displayed
									on the control panel
									even if the depart-
									ment management
									function is not set
									on. In this case, ini-
									tialize the area with
									this code. This area
									is normally initial-
									ized at the factory.
675-0	Paper	Coated Paper	Upper	ALL	0	SYS		Sets whether or not		4
	feeding	Mode setting	drawer		<0-1>			applying the Coated
		for paper						Paper Mode to each
		source						paper source.
								0: Normal mode
675-1			Lower	ALL	0	SYS		1: Coated Paper Mode		4
			drawer		<0-1>		*		Coated Paper Mode
									- This mode is
									selected when the
									paper which often
									causes the misfeed-
675-2			PFP upper	ALL	0	SYS				4
									ing (ex. coated
			drawer		<0-1>
									paper) is used. The
									occurrence of mis-
									feeding is reduced
675-3			PFP lower	ALL	0	SYS				4
									by lengthening the
			drawer		<0-1>
									jam detection time.
									However, the print-
									ing speed is low-
675-4			LCF	ALL	0	SYS			ered since the	4
					<0-1>				printing cycle is also
									lengthened with the
									lengthened jam
									detection time.

© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2 - 131