NEC NLT-15 Other functions, Auto sleep, Blue back, Sleep timer, Sound output selection

Other functions

TV, COMPONENT, VIDEO and S-VIDEO modes

(You can’t set PC mode in this menu. Use the TV/AV button) Inputs can be set for COMPONENT, VIDEO or S-VIDEO mode. The COMPONENT, VIDEO or S-VIDEO mode is used when a video cassette recorder (VCR), or other equipment is connected to the set.

Note : When a VCR is connected to the aerial socket the set is used in TV mode. See the Connection of external equipment section.

1.Press the MENU button.

2.Select the Special menu.

3.Press the PRxy button to select Input.

4.Press the VOLÏq button to select TV,

COMPONENT, VIDEO, S-VIDEO.

COMPONENT : COMPONENT OUT connected to the COMPONENT INPUT of the set.

VIDEO : VIDEO OUT connected to the VIDEO input of the set.

S-VIDEO : S-VIDEO OUT of VCR connected to the S- VIDEO input of the set.

Alternatively you can select the TV, COMPONENT,VIDEO, S-VIDEO or PC mode by pressing the TV/AV button.

Auto sleep

If you select Auto sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting.

1.Press the MENU button.

2.Select the Special menu. Then press the VOLÏq button.

3.Press the PRxy button to select Auto sleep.

4.Press the VOLÏq button to select On.

5.Press the TV/AV button to return to normal TV viewing.

Blue back

No signal channel is expressed as a blue screen.

Special

Input	TV
Auto sleep	Off
Blue back	Off

5-6=<>)>

POWER

SSM			PSM
MENU	I/II	Q.VIEW	TV/A V
		PRV
CVOL		OK	VOLB
		PRW
TEXT/MIX	SIZE	SLEEP	INDEX
UPDA TE	TIME	REVEAL

Other functions

Sleep timer

You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses.

Press the SLEEP button to select the number of minutes.

The display will appear on the screen, followed by 0, 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected.

Note : a. To view the remaining sleep time, press the SLEEP button once.

b. To cancel the sleep time, repeatedly press the SLEEP button until it displays “0”.

Sound output selection

In VIDEO mode, you can select output sound for the left and right loud-speakers.

Repeatedly press the I/II button to select the sound output.

L+R : Audio signal from audio L input is sent to left loud- speaker and audio signal from audio R input is sent to right loud-speaker.

L+L : Audio signal from audio L input is sent to left and right loud-speakers.

R+R : Audio signal from audio R input is sent to left and right loud-speakers.

B120

POWER

SSM			PSM
MENU	I/II	Q.VIEW	TV/A V
		PRV
CVOL		OK	VOLB
		PRW
TEXT/MIX	SIZE	SLEEP	INDEX
UPDA TE	TIME	REVEAL

16

17