12
Setting up TV Programme
Once you have preset the programme, you will be able to
use the PRxyor NUMBER buttons to scan the
programme you programmed.
Programme can be tuned using Auto or Manual
programme menu.
Auto Programme
All programme that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
1. Press the MENU button.
2. Select the Setupmenu, then press VOLÏq button.
3. Select the Auto programme menu, then press
VOLÏqbutton.
4. Press the PRxybutton to select System.
5. Select a TV system with the VOLÏqbutton;
BG: (West Europe/Asia/M.East/Africa/Australia)
I: (UK/Hong Kong/South Africa)
DK: (Russia/China/East Europe)
M: (USA/Korea/philippines)
6. Press the PRxybutton to select Storage from.
7. Select the beginning programme number with the
PRxybutton or NUMBER buttons.
8. Select Start, then press VOLÏqbutton.
PressMENU button to finish auto programme.
9. Press the TV/AV button to finish Auto programme.
10. Press the TV/AVbutton to return to normal TV
viewing.
ƇƉȖȘ 5-6=<>)>
Auto programme
System BG
Storage from 1
Start
13
Setting up TV Programme
Manual Programme
Manual Programme lets you manually tune and arrange
the programme in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
1. Press theMENU button.
2. Select the Setupmenu, then press VOLÏq button.
3. Select Manual programmemenu, then press
VOLÏqbutton.
4. Press the PRxybutton to select System.
5. Select a TV system with the VOLÏqbutton.
BG: (West Europe/Asia/M.East/Africa/Australia)
I: (UK/Hong Kong/South Africa)
DK: (Russia/China/East Europe)
M: (USA/Korea/philippines)
6. Press the PRxybutton to select Channel.
7. Press the VOLÏqbutton to select V/UHF or Cable
as required. If possible, select the programme
number directly with the number buttons.
8. If the TV picture reception is not good, then do the
fine tuning. Select FINE,then adjust the received
signal with the VOLÏq button.
9. Press the PRxybutton to select Search. Press
theVOL Ïq button to commence searching. If a
channel is found the search will stop.
10. Press PRxybutton to select NAME.
PressVOL Ïq button to allocate the location and
usePRxy button to select the character.
(blank, +, -, Alphabet A to Z, Numeric 0 to 9)
11. If this programme is the one required, press the
PRxybutton to select Storage.Select the
desired programme number with the VOL
Ïqbutton or NUMBERbuttons.
12. Press the OKbutton to store it. The display Stored
will appear.
To store another programme, repeat steps 5 to 10.
ƇƉȖȘ 735-6=<>)>
Manual programme
System BG
Channel V/UHF 5
Fine ȘȘȘ
Search ȘȘȘ
Name
Storage 1