16
Sound Control
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programme.
1. Press the MENUbutton.
2. Select the Soundmenu, then press VOLÏq button.
3. Press the PRxybutton to select the desired
sound item; Equalizer, Balance, AVLSurround or
headphone Volume.
4. Press the VOLÏqbutton to make desired
adjustment.
5. Press the VOLÏqbutton in Equalizer to set the
Equalizer.
6. Press the PRxybutton to select your preferred
setting ; Flat,Music,Movie,Speechor User.
To set the Equalizer User.
a. Select Userby pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq
button.
c. Make appropriate sound level with the PRxy
button.
d. Press the MENUbutton to return to preceding
MENU and the TV/AVbutton to return to normal
TV viewing.
7. Select the Balance menu and adjust the balance of
speakers.
8.
Select the AVL(Automatic Volume Leveler) menu On
or Off
9.
Select the Surround menu On or Off.
10. Select the nVolume menu and adjust the volume
from headphone.
11. Select the Sub woofer menu to adjust the bass
volume.(It is possible when the Sub woofer is
connected to the set.)
żThe sound Flat, Music, Movieand Speech are
programmed for good sound reproduction at the factory
and cannot be changed.

Auto Sound Control

SSM (Sound Status Memory)

1. Press the SSMbutton.
2. Press the SSMbutton repeatedly to select.
Each press of the button changes the screen display as below.
Flat؋Music ؋Movie ؋Speech ؋User
ƇƉȖȘ 5-6=<>)>
Sound
Equalizer Ș
Balance 0
AVL Off
Surround Off
nVolume 30
Sub woofer 0
ƇƉ 5-6=<>)>
Equalizer
Flat
Music
Movie
Speech
User
  3Pb
17
Other functions

TV,

COMPONENT

and S-VIDEO modes

(You can’t set PC mode in this menu. Use the TV/AV
button)
External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), COMPONENT
mode is used for COMPONENT type devices.
Note: If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENUbutton.
2. Select the Specialmenu.
3. Press the PRxybutton to select Input.
4. Press the VOLÏqbutton to select TV,
COMPONENT and S-VIDEO.
COMPONENT: Component device connected to the
COMPONENTjack.
S-VIDEO: S-VIDEO device connected to the TV's
S-VIDEO Input.
To return to TV mode, press the TV/AVbutton.
Alternatively you can select the TV, COMPONENT,
S-VIDEO, PC-ANALOG or PC-DIGITAL mode by
pressing the TV/AVbutton.

Auto sleep

If you select Auto sleep onthe set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENUbutton, select the Special menu,
then press VOLÏqbutton.
2. Press the PRxybutton to select Auto sleep.
3. Press the VOLÏqbutton to select On.
4. Press the TV/AVbutton to return to normal TV
viewing.

Blue back

Programme without a program signal appear in blue.

Auto wide (Aspect Ratio Control)

Press the ARC button to select a desired picture format.
Each press of the ARC button, selects Auto Wide, 16:9,
14:9, ZOOM, 1:1 and Auto wide mode.
ƇƉȖȘ 5-6=<>)>
Special
Input TV
Auto sleep Off
Blue back On
Auto wide Off