NEC NP400G Adjusting Horizontal/Vertical Position HORIZONTAL/VERTICAL, Using On-Screen Menu

5. Using On-Screen Menu

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]

Adjusts the image location horizontally and vertically.

-An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.

-The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied.

To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments.

Selecting Overscan Percentage [Overscan]

Select overscan percentage (0%, 5% and 10%) for signal.

Projected image

Overscaned by 10%

NOTE:

•The [0[%]] cannot be selected when VIDEO and S-VIDEO signals are used.

•[OVERSCAN] is not available when [NATIVE] is selected for [ASPECT RATIO].

53