NEC NWA-008862-001 manual LAN Connection, Series 3300 software R8 software or later required, Page

CHAPTER 1 MATWorX

2. Hardware Connections

LAN Connection

You can connect your PC to the PBX via the Ethernet LAN.

LAN Connection

PBX LAN

MP

ETHER

LAN Connector

LAN Cable

(10BASE-T/

100BASE-TX)

HUB/Router

PC

NOTE: The MP program downloading is not available on LAN connection.

1.Make the Direct Connection.

For details, refer to “Direct Connection”.

Page 6

2.Set the following data using LAN interface Add- In.

•IP Address

•Subnet Mask

•Default Gateway Address

NOTE: When the system was initialized by “B” (All Clear), the following IP address and subnet mask are set as a fixed value. Therefore you can connect your PC to the PBX via the LAN, even if you make your PC Direct Connection (RS-232C connection) and do not set an IP address using office data.

IP Address : 192.168.1.36

Subnet Mask : 255.255.255.0

[Series 3300 software (R8 software) or later required]

NWA-008862-001 Rev.2.1	Page 11
ajch1001.fm