NEC NWA-008862-001 manual Launch Microsoft Windows on your PC

CHAPTER 1 MATWorX

3. Installing MATWorX

NOTE 2: The following procedure assumes that you are starting the Setup program from your computer’s CD-ROM drive D:. If you start from a different drive, substitute the letter of that drive in this procedure.

1.Launch Microsoft Windows on your PC.

2.Insert the MATWorX CD in the CD-ROM drive.

NOTE: If you set your PC starting the Setup program of MATWorX automatically when inserting a CD in the CD-ROM drive, the Welcome dialog is displayed. At this time, advance to step 6 (skip step 3 to 5).

3.Select Run from the Start taskbar.

4.A dialog similar to the following is displayed.

Run Dialog

5.Type D:Setup in the Open text box and click OK button.

NWA-008862-001 Rev.2.1	Page 15
ajch1001.fm