NEC NWA-008862-001 manual Hardware Connections

CHAPTER 1 MATWorX

2. Hardware Connections

2. Hardware Connections

There are three ways in connecting a PC to the PBX.

(1)Direct Connection

Connect PC serial port to the PBX serial port us- ing a MAT cable. Data throughput can reach 19200 bps.

(2)Modem Connection

Connect PC modem to the PBX built-in modem via the public network.

This connection can be used for remote access. The default setting of data throughput is 9600 bps, however, you can reach 19200 bps by setting of CM40 Y=08>1:5.

(3)LAN Connection

Connect your PC to the PBX via the Ethernet LAN.

NWA-008862-001 Rev.2.1	Page 5
ajch1001.fm