Removing the Wireless Module
To remove the Wireless Module, first remove the keyboard cover (see Removing the keyboard cover), remove the keyboard (see Removing the keyboard), remove the heat plate (see Removing heat plate), then perform the following steps:
1. Disconnect the wireless antenna connectors as shown in Fig. 14
Fig. 14 Disconnecting the wireless antenna
Note: You might consider disconnecting the touch pad flat cable before removing the wireless module.
2. Unclip the wireless module to release it from slot and put it aside.
Removing Heat Sink & CPU
To remove the Heat Sink & CPU, first remove the Keyboard Cover (see Removing the keyboard cover), remove the keyboard (see Removing the keyboard), remove optical drive & heat plate (see Removing optical drive & heat plate) then perform the following steps:
1. Release the screws on the heat sink in descending order (4 3 2 1) as shown in Fig. 15
M2.5x11 Black
NEC Versa P600 Disassembly Manual | Page 11 |
