Flexible Arm Installation
This LCD monitor is designed for use with a fl exible arm.
To prepare the monitor for alternate mounting purposes:
NOTE: For PA301W, the monitor must be installed or moved by two or more people.
•Follow the instructions provided by the manufacturer of the display mount.
•To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor. See pages
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place hands on each side of the monitor and lift up to the highest position.
3.Place monitor face down on a
4.Place one hand around the base and one hand on the Quick Release Lever.
Push and hold the Quick Release Lever in the direction indicated by the arrows (Figure S.1).
5. Lift up the stand to unhook it from the monitor (Figure S.1). The monitor can now be mounted using an alternate method. Reverse process to reattach stand.
NOTE: Handle with care when removing monitor stand.
Figure S.1
Mount Flexible arm
This LCD monitor is designed for use with a fl exible arm.
1.Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2.Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1).
Caution: Use ONLY the screws (4 pcs) that are included or the screws M4 size (Length: thickness of bracket and washer +
200 mm*2 | 100 mm |
Unit |
| Mounting |
|
|
| Bracket |
|
|
| Washer |
|
|
| Screw |
|
| Thickness |
| |
|
|
| |
|
| of bracket | 100 mm |
|
| and washer |
NOTE: Tighten all screws. | Weight of LCD assembly: 7.0 kg (PA231W) | |
7.4 kg (PA241W) | ||
(recommended Fasten Force: 98 - 137N•cm) | ||
9.6 kg (PA271W) |
12.5 kg (PA301W)
Figure F.1
*2 Only for PA271W/PA301W.
