| AUTO FINE*1 | This function automatically and periodically adjusts the “FINE” setting for change in signal |
| (Analog input only) | condition. This function adjusts approximately every 33 minutes. |
|
|
|
| H.RESOLUTION | Adjusts the horizontal size by increasing or decreasing the setting. |
|
| Press “RIGHT” button to expand the width of the image on the screen. |
|
| Press “LEFT” button to narrow the width of the image on the screen. |
|
|
|
| V.RESOLUTION | Adjusts the vertical size by increasing or decreasing the setting. |
|
| Press “RIGHT” button to expand the height of the image on the screen. |
|
| Press “LEFT” button to narrow the height of the image on the screen. |
|
|
|
| EXPANSION | Sets the zoom method. |
|
| FULL: The image is expanded to full screen, regardless of the resolution. |
|
| ASPECT: The image is expanded without changing the aspect ratio. |
|
| OFF: The image is not expanded. |
|
| CUSTOM: When CUSTOM is selected as the Expansion mode, it becomes possible to |
|
| adjust the H. ZOOM., V. ZOOM, and ZOOM POS. |
|
|
|
| SIDE BORDER | Adjusts the side black bars color between black and white. |
| COLOR |
|
|
|
|
Tag6 | USB SELECTION | USB UP Stream Port Selection for |
|
| |
|
| computer to each of the upstream ports, the monitor’s USB downstream ports can be |
|
| used by selecting this setting for the current input signal. When using only one upstream |
|
| port, the connected upstream port is active. |
|
| You can change the active display and upstream USB port combination by using the |
|
| Input button (see page 9). |
|
| NOTE: To avoid data loss, before changing USB upstream ports, ensure that no USB |
|
| storage devices are in use by the operating system of the computer attached to the USB |
|
| upstream port. |
|
|
|
| DP | Adjusts the delay time between |
| DELAY*4 | from power management system to avoid a timing confl ict between the Link Training |
|
| phase for each DisplayPort input. |
|
|
|
| EDID EXTENSION | A communication setting with input device, containing signal timing. |
| (Digital Input Only) | NORMAL: When a PC or other computer equipment is connected, select “NORMAL”. |
|
| Enhanced: Alternate setting for |
|
| Note: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any problems, |
|
| please refer to the Troubleshooting section of this User’s Manual. |
|
| When EDID EXTENSION has been changed, the connected equipment has to be |
|
| restarted. |
|
|
|
| VIDEO DETECT*2 | Selects the method of video detection when more than one computer is connected. |
|
| Press “LEFT” or “RIGHT” to select. |
|
| FIRST: When current video input signal is not present, then the monitor searches for a video |
|
| signal from the other video input port. If the video signal is present in the other port, then the |
|
| monitor switches the video source input port to the new found video source automatically. |
|
| The monitor will not look for other video signals while the current video source is present. |
|
| LAST: When the monitor is displaying a signal from the current source and a new |
|
| secondary source is supplied to the monitor, then the monitor will automatically switch to |
|
| the new video source. When current video input signal is not present, then the monitor |
|
| searches for a video signal from the other video input port. If the video signal is present |
|
| in the other port, then the monitor switches the video source input port to the new found |
|
| video source automatically. |
|
| NONE: The Monitor will not search the other video input port unless the monitor is |
|
| turned on. |
|
|
|
| OFF TIMER | Monitor will automatically turn off after the preset time period from power on with the |
|
| ON/OFF function. When you select “ON”, press “SELECT” and “LEFT” or “RIGHT” to adjust. |
|
| Before powering off, a message will appear on the screen asking the user if they want to |
|
| delay the turn off time by 60 minutes. Press any OSD button to delay the turn off time. |
|
|
|
| OFF MODE | The Intelligent Power Manager allows the monitor to enter into a power saving mode after |
|
| a period of inactivity. The OFF MODE has three settings. |
|
| OFF: Monitor does not go into power save mode when the input signal is lost. |
|
| STANDARD: Monitor enters power save mode automatically when the input signal is lost. |
|
| OPTION: Monitor enters power save mode automatically when the amount of |
|
| surrounding light goes below the level that is determined by the user. |
|
|
|
*1 Only for PA231W/PA241W. | *2 This item does not reset by FACTORY PRESET (Tag7). | |
*4 PA301W only |
|