NEC PA301W, PA231W user manual English-22

	PIP DOWN/UP	When you select “PIP” in PIP MODE, you can control vertical position of PIP display area.
	PIP SIZE	Selects the size of the sub-picture used in PIP mode.
	BLANK SIGNAL SKIP	Skip no signal inputs when you change input signal with INPUT button.
	OSD ROTATION	AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is
		set to AUTO by default.
		LANDSCAPE: Display the OSD with landscape mode.
		PORTRAIT: Display the OSD with portrait mode.
	IMAGE ROTATION	AUTO: The main window image automatically rotates according to the orientation of the
		display. If “AUTO” is selected in the “OSD ROTATION” menu, the main window image
		rotates according to the orientation of the monitor.
		OFF: The main window image is not rotated. IMAGE ROTATION is set to OFF by default.
		ON: The main window image always rotated.
		Note: For PA271W/PA301W, this function is effective only if PICTURE BY PICTURE-
		ASPECT or PICTURE BY PICTURE-FULL.
	SUB IMAGE	AUTO: The sub window image automatically rotates according to the orientation of the
	ROTATION	display. If “AUTO” is selected in the “OSD ROTATION” menu, the sub window image
		rotates according to the orientation of the monitor.
		OFF: The sub window image is not rotated. IMAGE ROTATION is set to OFF by default.
		ON: The sub window image always rotated.
	DDC/CI	DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control with
		connected PC by video cable.
		NOTE: Set DDC/CI to ENABLE when using hardware calibration software like
		MultiProfi ler over DisplayPort, DVI or VGA.
	SCREEN SAVER	Use the SCREEN SAVER to reduce the risk of image persistence.
		MOTION (Default OFF): Screen image moves periodically in 4 directions in order to
		reduce the risk of image retention.
		Timing for MOTION can be set so the screen image moves in intervals from every
		10 to 900 seconds. Timing is set in 10-second increments.
		OPTION (Default REDUCED): There are two optional selections.
		REDUCED: Screen image is reduced to 95% size and is moved periodically in
		4 directions. Screen may appear slightly less sharp than normal. The full image appears
		on the display.
		NOTE: Some input signals may not be supported by REDUCED.
		FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen
		image goes outside of the display area in the direction that it shifts so that a portion of the
		image may appear to be cut off.
		NOTE: SCREEN SAVER works when ENABLE is OFF in TILE MATRIX and PIP MODE
		is OFF.
Tag9	INPUT SETTING*1, *2	Video Band Width: Reduce the visual “noise” level of the input signal. It is strong
		ineffective, so that a number becomes small. Press “LEFT” or “RIGHT” to select.
		Sync Threshold: Adjusts the slice level of a synchronization signal. Press “SELECT” to
		move the adjustment menu. Adjusts the sensitivity of the separate or composite input
		signals.
		Try this option if the FINE adjustment does not successfully eliminate the noise.
		SOG Threshold: Adjusts the sensitivity of the Sync On Green input signals. Adjusts the
		slice level when separating synchronization from sync On Green signal input. Press
		“LEFT” or “RIGHT” to select.
		Clamp position: Operating your monitor at a non-standard timing may cause images to
		appear darker than normal or have color distortion. Use of the Clamp position control will
		adjust images to their normal state.
*1 Only for PA231W/PA241W.		*2 This item does not reset by FACTORY PRESET (Tag7).

English-22