NEC V462, V651 user manual Terminal Panel, English

Terminal Panel

V462

H

V

B, Cb/Pb

L/R

L

(IN)

(IN)

(IN)

(IN2)

(IN3)

R

L

RS-232C

DVI-D

VIDEO

AUDIO

SPEAKER

REMOTE

OUT

OUT

OUT

OUT

AUDIO IN

AC IN

RGB/HV

MAIN POWER

VGA IN

OUT

DVD/HD

LAN

VIDEO2

DISPLAYPORT

HDMI

IN

REMOTE	RS-232C	DVI-D	VIDEO 1	S-VIDEO	INTERNAL/EXTERNAL
IN
	IN	IN			SPEAKER SWITCH
			IN	IN
		R, Cr/Pr	G, Y, VIDEO	L/R	R
		(IN)	(IN)	(IN1)	(IN3)

English

￿AC IN connector

Connects with the supplied power cord.

￿Main Power Switch

On/Off switch to turn main power ON/OFF.

￿LAN port (RJ-45)

LAN connection. See page 32.

￿REMOTE IN/OUT

Use the optional wired remote control by connecting it to your monitor.

NOTE: When you use Remote IN/OUT, IR CONTROL in OSD menu should be NORMAL.

NOTE: Do not use this connector unless specifi ed.

￿RS-232C (D-Sub 9 pin)

IN connector: Connect RS-232C input from external equipment such as a PC in order to control RS-232C functions.

OUT connector: Connect RS-232C output. To connect multiple MultiSync monitors via RS-232C daisy Chain.

￿DISPLAYPORT connector

IN connector: To input DisplayPort signals.

￿DVI IN (DVI-D)

To input digital RGB signals from a computer or HDTV device having a digital RGB output.

* This connector does not support analog input.

￿DVI OUT (DVI-D)

To output the DVI signal from either DVI IN or HDMI connection. To output the DVI signal from the HDMI connection, the HDMI input must be selected.

￿HDMI connector

To input digital HDMI signals.

￿VGA IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or from other RGB equipment.

￿RGB/HV IN [R, G, B, H, V] (BNC)*

To input analog RGB signals or signals from other RGB equipment.

This is also to connect equipment such as a DVD player, HDTV device and Set-Top-Box. Sync-on-Green signal can be connected to the G connector.

This input can be used with an RGB, DVD/HD or Video source. Please select signal type in TERMINAL SETTING.

￿VIDEO 1 IN connector (BNC)*

To input a composite video signal.

￿VIDEO OUT connector (BNC)

To output the composite video signal from the VIDEO IN connector.

￿AUDIO OUT

To output the audio signal from the AUDIO IN 1, 2, 3, DPORT and HDMI to an external device (stereo receiver, amplifi er, etc.).

￿S-VIDEO IN connector (Mini DIN 4 pin)

To input the S-video (Y/C separate signal).

￿AUDIO IN 1, 2, 3

To input audio signal from external equipment such as a computer, VCR or DVD player.

￿EXTERNAL SPEAKER TERMINAL

To output the audio signal from AUDIO 1, 2, 3, DPORT and HDMI.

Red terminal is plus (+). Black terminal is minus (-).

Note: This speaker terminal is for 15W + 15W (8 ohm) speaker.

English-9