8
Call Park - System

Set Retrieve

With a call in progress: From any station:
Press Transfer Lift handset
Dial Call Park Set code 4*Dial Call Park Retrieval code 4#
Dial Call Park location 0-9 Dial Call Park Location 0-9
Replace handset Converse
Note: If the dialled Call Park location is busy, dial another Call Park location (0-9).
Station Busy/No Answer Options

Automatic Callback

Set Answer
When calling a busy digital When both telephones are idle
telephone: originating telephone rings:
Dial Automatic Callback code 0Lift handset
Replace handset Call is placed automatically

Callback Request

Set Answer
When calling a busy or Receive display and/or Feature
unanswered digital telephone: LED message indication:
Dial Callback Request code #Lift handset
Replace Handset Dial #; request originator is
automatically called
Repeat above procedure to
respond to additional messages
Note: Callback messages are automatically cancelled once the originating station is
called. Callback Request access code # must be assigned in system programming.

Tone Override

Set Answer
When calling a busy digital telephone: With a call in progress:
Dial Tone Override code *Receive tone override signal †
to send tone Press Hold
Wait for signalled party to answer Converse with second party
†If handsfree, a visual indication only (*) will be provided on the telephone’s display.
Note: An Override Tone will be sent each time *is pressed.
NEC Xen Phone UserGuide 18/7/2003 3:56 PM Page 8