14
Station Outgoing Lockout

Changing Lockout Code

Press Speaker
Dial Lockout Change access code_____
Dial current Lockout code
Dial new Lockout code
Press Speaker
Note 1: By default, Lockout code is set at 0000000000 (10 zeros).
Note 2: When Lockout code is set for the first time, station is automatically restricted.
Note 3: Lockout code may be a maximum of 10 digits. If the new Lockout code is
less than 10 digits, press the Speaker to re-enter.
Note 4: When set, Station Outgoing Lockout restricts all outgoing calls.

Set/Cancel Station Outgoing Lockout

Press Speaker
Dial Station Lockout
- Set code _____
- Cancel code _____
Dial Lockout code
Press Speaker
Account Code Entry
With an outside call in progress: With an outside call on hold:
Press Feature Dial Account Code Entry
Dial 66 Code_____
Dial Account Code Dial Account Code
(16 digits maximum) (16 digits maximum)
Press Feature Retrieve held call
Note 1: The outside party will not hear digits being dialled.
Note 2: The Account Code Entry Code may be assigned to a Feature Access Key or
One Touch Key.
Account Code Forced
To place an outside call:
Lift handset
Dial Forced Account Code access code_____
Dial Forced Account Code_____(up to 13 digits)
Dial trunk access code i.e. 0 and outside number
Note: When calling from a station that is assigned the Account Code Forced /
Verified feature, outgoing call will only be processed after the dialled Account
Code is verified.
NEC Xen Phone UserGuide 18/7/2003 3:56 PM Page 14