2
General Information
The following should be considered when reviewing this User Guide:
Instructions are provided for the NEC Xen IPK digital telephones (Dterm Series i).
All operational instructions assume Prime Line Pickup is assigned to
intercom dial tone, Ringing Line Preference is assigned to all telephones,
a Call Appearance and Call Arrival key has been assigned to all digital
telephones and only a single tenant has been assigned in the system.
All access codes listed are standard; some may vary based on system
assignment. Please consult your authorised NEC Dealer for the access codes
applicable to your system.
Access to many features is based on system assignments. Not all features
may be available from your telephone.
Digital telephones are equipped with displays to provide useful call processing
information such as digits dialled, recall indications, feature confirmation, etc.
Xen IPK digital telephones also show features accessible by the soft keys.
Lamp Status
Line Keys:
Incoming Call
Held Call - Your telephone
Held Call - Other telephone
Call in progress
Your telephone
Other telephone
Hold recall
Feature Key:
DND Set
Call Forward Set
Callback Request
Other:
Held Intercom Call
Microphone On
Handset Muted
Conf LED Flashing Red
Mic LED Steady Red
Mic LED Flashing Red
Intermittent Flashing Red
Intermittent Flashing Red
Slow Flashing Red
Rapid Flashing Green
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Steady Green
Steady Red
Intermittent Flashing Green
Large LED: (360˚ Visual Ring Indicator)
Incoming calls
(CO/PBX, DIT or ANA)
Incoming intercom,
TIE Line or DID Call
Message from Attendant
Voicemail Message
Function

LED Indications

NEC Xen Phone UserGuide 18/7/2003 3:56 PM Page 2