NEC XP29 Xtra, XM29 Xtra, XP29, XM29 Xtra display, scan mode, Controls Group, counter clockwise, the minimum level, waver or to be blurred, screen to be the same as the top, TOP, TILT, NOTE:, NOTE:

H-position/H-width/Pin-cushion Controls Group

The H-position/H-width/Pin-cushion Controls allow you to adjust the horizontal position, horizontal size and pin-cushion of the image.

R G B

DV CV

R G B

DV CV

H - P O S I T I O N

H - W I D T H

P I N - C U S H I O N

P I N - B A L A N C E

P I N - C O R N E R T O P

P I N - C O R N E R B O T T O M

V-position/V-height/V-linearity Controls Group

The V-position/V-height/V-linearity Controls allow you to adjust the vertical position, vertical size and vertical linearity of the image.

R G B

DV CV

R G B

DV CV

V - P O S I T I O N

V - H E I G H T

V - L I N E A R I T Y 1

V - L I N E A R I T Y 2

H-POSITION : Pressing + or - moves the image horizontally right or left.

H-WIDTH : Pressing + or - decreases or increases the horizontal size of the image (wider or narrower).

PIN-CUSHION : Pressing + or - decreases or increases the curvature of the sides either inward or outward.

PIN-BALANCE : Pressing + or - decreases or increases the curvature of the sides to right or to left.

PIN-CORNER TOP : Pressing + or - decreases or increases the curvature of the top corners inward outward.

PIN-CORNER TOP BOTTOM : Pressing + or - decreases or increases the curvature of the bottom corners inward or outward.

NOTE: The V-LINEARITY controls allow you to adjust the spacing of the areas on the screen. The object of this control is to ensure that a one-inch circle is a true one-inch circle where ever it is drawn on the screen.

•draw equally spaced horizontal lines using a drawing application that has a ruler.

•use the V-LINEARITY 1 and 2 controls to adjust the spacing between the lines near the top and the bottom of your screen.

Keystone/Tilt/Rotation/Scan Select/Moire CancellerControls Group

The Keystone/Tilt/Rotation/Scan Select Controls/Moire Canceller allow you to adjust the raster rotation or angle of the sides of your display, to select either Under Scan (for RGB display) or Over Scan (for VIDEO display) and to reduce moire.

R G B

DV CV

R G B

DV CV

K E Y S T O N E

T I L T

R O T A T I O N

S C A N S E L E C T

M O I R E C A N C E L E R

U N D E R

O V E R

V-POSITION : Pressing + or - moves the image vertically up or down.

V-HEIGHT : Pressing + or - increases or decreases the vertical size of the image (taller or shorter).

V-LINEARITY 1 : Pressing + increases the spacing between the lines near the top and decreases the lines near the bottom at the same time; pressing - increases the spacing between the lines near the bottom and decreases the lines near the top at the same time.

V-LINEARITY 2 : Pressing + or - increases or decreases the spacing between the lines near the top of your screen and near the bottom of your screen at the same time.

KEYSTONE (trapezoidal) : Pressing + or - increases or decreases the bottom of the

	screen to be the same as the top.
TILT	: Pressing + or - increases or decreases the tilt of your
	display.
ROTATION (raster rotation)	: Pressing + or - rotates the entire display clockwise or
	counter clockwise.
SCAN SELECT	: Pressing + or - selects the over scan mode or the under
	scan mode.
MOIRE CANCELER	: Pressing + reduces moire and pressing - returns to the
	normal condition. Keep pressing + until moiré is reduced to
	the minimum level.

	NOTE: Increasing + level too much can cause characters to
	waver or to be blurred.