NEC XP29 Xtra, XM29 Xtra, XP29, XM29 Xtra A B D, Terminal Board

5

Terminal BoardA B D

SPEAKERS MUST HAVE				VIDEO 1		RGB1					PC / EXT CTL
MORE THAN 5WATT RATING			BNC					DIP SW	REMOTE
IMPEDANCE 8 OHM		75		S	AUDIO
EXT SPEAKERS						75		ON
			IN	R	L(MONO)					IN
RIGHT	LEFT					IN
		HIGH		IN		HIGH		1 2 3 4 5 6 7 8
			THROUGH	THROUGH		THROUGH				OUT
			OUT	OUT		OUT
SPEAKER SELECT			BNC	VIDEO 2		RGB AUDIO	R/CR/PR	RGB 2	B/CBPB	H/CS	V
INT	EXT			S	AUDIO			G/Y/Y
AC IN	� 75						75 IN				75
			IN	R	L(MONO)	R L(MONO)
		HIGH		IN		IN	HIGH				HIGH
			THROUGH	THROUGH		THROUGH	THROUGH
			OUT	OUT		OUT	OUT

C

ASpeakers

RIGHT + ..... Connect RIGHT speaker positive wire here. RIGHT - .....Connect RIGHT speaker negative wire here. LEFT - .......Connect LEFT speaker negative wire here.

LEFT + ....... Connect LEFT speaker positive wire here.

BSPEAKER SELECT INT/EXT Select Switch

Set to the INT position for built-in monitor speakers. Set to the EXT position for speakers connected to EXT SPEAKERS terminals.

CAC Input

Connect the supplied power cord’ s three-pin plug here.

SPEAKERS MUST HAVE			VIDEO 1			RGB1					PC / EXT CTL
MORE THAN 5WATT RATING		BNC	S		AUDIO			DIP SW	REMOTE
IMPEDANCE 8 OHM		75				75
EXT SPEAKERS				R	L(MONO)			ON		IN
RIGHT	LEFT	IN				IN
		HIGH	IN			HIGH		1 2 3 4 5 6 7 8
		THROUGH	THROUGH			THROUGH				OUT
		OUT	OUT			OUT
SPEAKER SELECT			VIDEO 2			RGB AUDIO	R/C /P	RGB 2	B/C P	H/CS	V
INT	EXT	BNC	S		AUDIO		75				75
AC IN	�	75				R L(MONO)
		IN		R	L(MONO)		IN
		HIGH	IN			IN	HIGH				HIGH
		THROUGH	THROUGH			THROUGH	THROUGH
		OUT	OUT			OUT	OUT

Insert the prongs completely.

DVIDEO 1

VIDEO 1 IN (BNC type) .... Connect a VCR or laser disk player here to display the video.

S-VIDEO 1 IN ..... Here is where you connect S-Video input from an external source like a VCR.

THROUGH OUT (BNC type) ..... Connect to a second monitor’ s video input to

relay the video signal input at VIDEO 1 IN.

THROUGH OUT (S-VIDEO) .....Connect to a second monitor’ s S-connector

input to relay the video signal input at S-VIDEO 1 IN.

75 Ω/HIGH Impedance Select Switch for BNC type ... Set to 75 Ω ” during normal operation. In multiple connections using VIDEO 1 IN and THROUGH OUT (BNC type) terminals, set to “HIGH” on all but the last monitor. Set to “75 Ω” on the last monitor only.

AUDIO R IN .... This is your right channel audio input for stereo sound.

AUDIO L IN (MONO).... This is your left channel audio input for stereo sound

coming from video equipment or audio system. It also serves as the mono audio input.

AUDIO R THROUGH OUT ..... Connect to a second monitor’ s right channel

audio input.

AUDIO L THROUGH OUT ..... Connect to a second monitor’ s left channel

audio input.

6

8