CARE & CLEANING

DO NOT WASH PARTS IN A DISHWASHER

1. To remove maintenance unit from machine, lift cup

2. Maintenance unit can be removed in one piece and

support in upright position.

assembled/disassembled for easy cleaning.

DESC ALING MODE

Note: duration approximately 20 minutes. Steady orange middle light indicates descaling is needed.

1. Turn machine off and set Espresso button to 4 and

2. Open and close the lever to eject the capsule.

3. Empty drip tray and used capsule container and

Lungo button to 1.

 

replace.

EN

Steam pipe cleaning

For better performance and hygienic purposes clean your steam pipe after each usage to avoid milk residues from remaining inside and outside the steam nozzle.

CAUTION: use extreme caution when handling the steam pipe. Use rubber grip area only to avoid injury. Turn steam handle to OFF and allow for it to cool down before handling.

3. Wipe down the steam pipe with a damp cloth.

4.

 

To remove the frothing sleeve, twist the nozzle clockwise until it comes out then pull the sleeve downwards.

 

 

 

Sleeve can be washed in soapy water. Make sure openings are free of residue.

 

 

 

 

4.To enter descaling mode press and hold the Espresso button while turning the machine on. Middle light steady orange to confirm descaling mode.

7.Set steam handle to .

5.Fill water tank with 2 Nespresso descaling liquid agents and the rest with water.

8.Press Lungo button to start descaling. ddle light will start to blink.

6.Place a container (min 1.5 L) below coffee outlet and steam pipe.

9.A mix of operations between coffee and steam pipe flow will occur. Do not touch the machine during this operation. Steady middle light indicates descaling is complete.

20

21

5927_MAESTRIA_MASTER_2012_v12.indd 22-23

07.02.13 14:55

Page 11
Image 11
Nespresso BEC800 manual Care & Cleaning, Desc Aling Mode, Support in upright position, Lungo button to Replace